Contact Us

Tel:+8615152288398

Fax:+86-510-86292857

Mob:+8615152288398

E-mail: sunny@yuanfangmach.com

Add: No.8 Kaitai Rd., Nanzha Street, Jiangyin City, Jiangsu Province, China

web:http://www.chamferingmachinechina.com

Home > News > Content
The Description Of The Use Time And Usage Count Of The Steel Pipe Finishing Equipment Nov 28, 2017

The steel pipe finishing equipment is a generic term for a class of equipment, not refer to a specific device. At this point, we should have a correct understanding. At the same time, we should also have a full understanding of this kind of equipment, so that we can master its relevant knowledge. And at the same time, we can also use the equipment correctly to obtain the proper use effect.

1. Does the steel pipe bending belong to the steel pipe finishing? If it does, what steel pipe finishing equipment will be used?

The steel pipe bending belongs to the steel pipe finishing. Specifically speaking, it is first to fix the several rollers of the outer diameter steel pipe circular arc car on the iron plate, and then fill the sand into the steel pipe and stuff the ends. For parts that need to be bent, bend it after heating with flame, or bend it with machine equipment. However, from now on, the latter is used more. In this process, the pipe bender will be used.

2. Is finishing only used once in the production process of the large diameter alloy seamless steel pipe?

Generally speaking, the production technology of the large diameter alloy seamless steel pipe has the process and step of finishing, so as to ensure the quality of finished products. However, it is important to note that finishing should be done twice. The first is the initial finishing, then the finishing. Only in this way, the desired purpose and effect can be achieved.

3. Is the steel pipe finishing equipment used before the pipe is cooled in the main production process of the high pressure pipe? In addition, does the precision bright pipe belong to the steel pipe?

The steel pipe finishing equipment should be used before the pipe is cooled in the main production process of the high pressure pipe. If these two steps are reversed, there will be problems, and will also affect the product quality of the high pressure pipes.

The precision bright pipe belongs to the steel pipe. In the production step or process, there is finishing, so it is necessary to use the steel pipe finishing equipment. And through the fine drawing or cold rolling treatment, a kind of precision steel pipe is obtained, which is one of the difference between it and ordinary steel pipe.

http://www.chamferingmachinechina.com/