Contact Us

Tel:+8615152288398

Fax:+86-510-86292857

Mob:+8615152288398

E-mail: sunny@yuanfangmach.com

Add: No.8 Kaitai Rd., Nanzha Street, Jiangyin City, Jiangsu Province, China

web:http://www.chamferingmachinechina.com

Home > Exhibition > Content
Which equipment belongs to the high-speed metal cutting machine and its product purchase importance Aug 31, 2018

The high-speed metal cutting machine, from its name, uses the object as a metal material and can be quickly cut off. Therefore, this type of cutting machine has the advantage of high work efficiency. Well, since the high-speed metal cutting machine is mentioned, and there is some understanding, below, it is advisable to go deeper and reach this level.

 

1. Do you want to pay attention to the purchase of high-speed metal cutting machines?

High-speed metal cutting machine, the purchase of its products, should be taken seriously and treated seriously, because if you do not pay attention to or sloppy treatment, there will be problems such as incorrect selection, which will affect the normal use of the product and its use. Performance and use effects, and even bring economic losses. Therefore, this conclusion will be met and it must be strictly enforced.

 

2. High-speed tungsten steel metal cutting machine, which is a high-speed metal cutting machine?

The high-speed tungsten steel metal cutting machine is a high-speed metal cutting machine from a professional point of view, because it is a metal such as tungsten steel on the cutting material. Moreover, the material can be quickly cut off to ensure the production and processing quality of the product. In addition, in the use of the cutting machine, it must be correct and standardized, in order to avoid problems during use.

 

3. For metal wire straightening and cutting machine for precision wire, can it be operated automatically?

Metal wire straightening and cutting machine for precision wire, which belongs to metal cutting machine, but whether it is a high-speed metal cutting machine, it is to see whether the running speed of the equipment reaches high speed or fast. If it can meet the requirements, it can be It is considered to belong to a high speed metal cutting machine. As for whether this kind of cutting machine can be operated automatically, from a technical point of view, it is completely achievable without any technical difficulties.

 

4. High-speed metal cutting machine, can it cut the solid bar? Is it a steel cutter?

The high-speed metal cutting machine, which is a metal material for the object to be operated, is capable of cutting the solid bar and can be carried out in batches. The material of the solid bar may be carbon steel or stainless steel.

 

The steel bar cutting machine, which cuts the steel bar, is Ф6-40 in the diameter of the bar. In addition, it is also possible to cut off the profiles of square steel, round steel, flat steel and angle steel with equivalent loading surface. Therefore, from this point of view, it belongs to the metal cutting machine, but it is not necessarily a high speed metal cutting machine. Moreover, it can be concluded that the high-speed metal cutting machine is not a steel cutting machine, and the two cutting machines are quite different.http://www.chamferingmachinechina.com/