Contact Us

Tel:+8615152288398

Fax:+86-510-86292857

Mob:+8615152288398

E-mail: sunny@yuanfangmach.com

Add: No.8 Kaitai Rd., Nanzha Street, Jiangyin City, Jiangsu Province, China

web:http://www.chamferingmachinechina.com

Home > Exhibition > Content
The equipment of the square billet production line rolling and the raw materials of producing the steel billet Sep 25, 2017

【Summary】First, we propose some concrete problems. Whether there is rolling in the square billet production line or not? If there is, what equipment will be used? What are the raw material through the square billet production line in the manufacturing process of the steel billet? Can the wire rod be achieved through the square billet production line? Everyone is concerned about these questions. Then, I will give you the concrete answers.

圆方的方坯生产线 图片   .jpg

1.Whether there is rolling in the square billet production line or not? If there is, what equipment will be used?  

From a professional point of view, there is rolling in the square billet production line, which is a very important working procedure. So, on the question, the answer is "yes". The main equipment it will use is the blooming mill. It rolls the steel ingot into the square billet and destroy the casting structure of the steel ingot. Then it will do the subsequent processing.


2.What are the raw material through the square billet production line in the manufacturing process of the steel billet?

In the manufacturing process of the steel billet, if we use the square billet production line, then there are hot rolled bars, cold drawn bars and so on the raw materials. And the bar is mainly divided into the round steel and square steel. There is reference standard of the description. So we have the manufacturing process according the standard


3.Can the wire rod be achieved through the square billet production line?

The wire rod is usually achieved through the high speed wire production line instead of the square billet production line. However, it has the square billet on the material. Therefore, it can achieve the square billet through the square billet production line. Then after machining the square billet, we can achieve the wire rod.


These problems are related to the square billet production line. So we give the specific answers for everyone to properly and profoundly understand it instead of having half-baked knowledge or misconception. Otherwise, the half-baked knowledge or misconception will affect its practical application and using effect. So everyone should take it  seriously and carry on earnestly. Then we can avoid these adverse effects.