Contact Us

Tel:+8615152288398

Fax:+86-510-86292857

Mob:+8615152288398

E-mail: sunny@yuanfangmach.com

Add: No.8 Kaitai Rd., Nanzha Street, Jiangyin City, Jiangsu Province, China

web:http://www.chamferingmachinechina.com

Home > Exhibition > Content
The bearing and acceptance work in the square billet production line Dec 07, 2017

The square billet production line is a specific type of the production line. Literally, it is used to produce square billets, so the finished product is square billet. So, based on this, next, we will continue learn something about its related study work. So, we can understand this kind of production line, and at the same time, ensure the smooth progress and its product quality.

1. Is the acceptance work of the square billet production line only for products?

The acceptance of the square billet production line is an important work, so it can not be treated carelessly. In addition to products, there are production equipment and production conditions. For the production equipment, we need to check whether it is working and using normally and whether there is abnormality. For the production state, it is necessary to check whether it can continuously produce.

2. Is the square billet caster indispensable in the square billet production line? In addition, how to decide the fluxion?

The square billet caster is an indispensable equipment in the square billet production line. Therefore, the equipment is very important and cannot be omitted. And the fluxion of the square billet caster, in general, is corresponding to the fluxion of the tundish. The tundish has several outlets, so the caster has several fluxion.

3. The bearing in the square billet production line

The bearing of the square billet production line, which needs to be considered, is the type of rolling bearing, structural form, tolerance level, technical requirements, materials and batch. Moreover, its basic production process is not completely same. The main parts of each bearing have corresponding processing process, so this point can not be wrong, or it will affect the processing effect and processing quality.

4. The important process or method in the square billet production line

The process or method used in the square billet production line can have a variety of options. The more commonly used is casting, because it has  advantages of wide application range, widespread raw materials, low cost and good comprehensive economic performance.

http://www.chamferingmachinechina.com/