Contact Us

Tel:+8615152288398

Fax:+86-510-86292857

Mob:+8615152288398

E-mail: sunny@yuanfangmach.com

Add: No.8 Kaitai Rd., Nanzha Street, Jiangyin City, Jiangsu Province, China

web:http://www.chamferingmachinechina.com

Home > Exhibition > Content
Steel pipe chamfering machine and pipe finishing equipment Mar 16, 2018

Steel pipe finishing equipment, although only six characters, but it contains a lot of equipment, so here is not an example, because the article is limited in length. If you want to use the steel pipe finishing equipment correctly, and at the same time, you can get a good finishing effect for the steel pipe. In the following, the description of the equipment will be introduced to achieve this goal.

 

1. Is a large-diameter steel pipe made into a small-diameter steel pipe that can be realized by a steel pipe finishing device?

Large-diameter steel pipes, if they are to become small-diameter steel pipes, are cold-drawn or cold-rolled steel pipes, which are used in steel pipe processing rather than steel pipe finishing. Therefore, in this process, Steel tube finishing equipment will not be used, but steel tube processing equipment such as cold drawn or cold rolling mills will be used.

 

2. After the completion of the steel tube processing, is the removal of the burr from the steel tube finishing range?

After the completion of the steel pipe processing, the steel pipe is inspected, whether there is a defect, and the surface quality and performance of the steel pipe are further improved. Therefore, steel pipe finishing equipment will be used. If, after the processing of the steel pipe, a burr occurs, then the removal of the burr is within the finishing range of the pipe. Therefore, the steel pipe finishing equipment will be used. As for which kind of pipe finishing equipment should be used, it depends on the actual situation.

 

3. Steel pipe chamfering machine, whether it belongs to steel pipe finishing equipment?

The steel pipe chamfering machine is used for chamfering the steel pipe material, so that the steel pipe can be further finished and its use requirements can be satisfied. Therefore, from this point of view, this machine and equipment belongs to steel pipe finishing equipment, and it is special equipment for steel pipe chamfering.

 

4. Is straightening or rectification of steel tubes necessary in the finishing of steel tubes?

The straightening or rectification of steel pipes, from a professional point of view, is to correct the shape defects of the steel pipes. Therefore, it is one of the important processes in steel pipe finishing. In steel pipe finishing equipment, steel pipe straightening machines are mainly used. . This process, whether or not it is necessary in the finishing of the steel pipe, depends on the actual situation and the requirements for the use of the steel pipe, which are determined by them.http://www.chamferingmachinechina.com