Contact Us

Tel:+8615152288398

Fax:+86-510-86292857

Mob:+8615152288398

E-mail: sunny@yuanfangmach.com

Add: No.8 Kaitai Rd., Nanzha Street, Jiangyin City, Jiangsu Province, China

web:http://www.chamferingmachinechina.com

Home > Exhibition > Content
Hydraulic chamfering automatic machine number and maintenance both comparison with pneumatic type Jan 19, 2018

On the specific types of chamfering machine we will learn and understand the object below is hydraulic chamfering automatic machine.For us, it is also a chamfering machine must be familiar with, because it is a common species to see and use.Only fully understand ,then the hydraulic chamfering automatic machine can be used correctly and at the same time achieve good economic benefits on the product.

1. The model of st-125cnc in hydraulic chamfering automatic machine

The st-125cnc hydraulic chamfering automatic machine is the specific model of chamfer, and it is also one of the more common models.It is mainly used for burr and chamfer processing before welding the front edge of work piece and metal plate.In addition, it can also be used for milling to obtain the desired chamfer Angle.

2.Hydraulic chamfering automatic machine properties and specific types.

Hydraulic chamfering automatic machine is a kind of small equipment mainly used for chamfering, milling and planing in the mould, hardware, machine tool, hydraulic parts, valve and textile industries.And it is fully automatic, so it can overcome the disadvantages of manual operation and greatly improve the processing quality and working efficiency.Its specific kind has straight chamfer Angle and curve chamfer these two kinds.

3.Is the use of hydraulic chamfering automatic machine widely used?What are the differences between it and pneumatic chamfering machine?

Hydraulic chamfering automatic machine has single and duplex parts, it can be automatically raised and lowered to replace the cutter, which can simplify the operation of changing knife,and also has a good changing effect.The difference between it and pneumatic chamfering machine is mainly in processing speed and structure, so it can be distinguished and judged according to these two specific aspects.

4. Maintenance of hydraulic chamfering automatic machine

(1)After the use of hydraulic chamfering automatic machine, the equipment should be cleaned up in time to ensure the cleanliness of the equipment.In addition,we need to carry out some inspection work on important parts and components to see if there is any problem.

(2)The bearing on the chamfering machine tool shaft should be lubricated regularly.The blade is an important part, so we need to check if there is any wear or damage. If there is a replacement blade, the machining effect and chamfer quality of the hydraulic chamfering automatic machine should be guaranteed.http://www.chamferingmachinechina.com/